background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 1 of
12
Safety Data Sheet
Copyright,2014,3M Company.
All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is
allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is obtained from
3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit thereon.
Document Group:
16-5850-9
Version Number:
12.00
Issue Date:
10/29/14
Supercedes Date:
08/22/12
SECTION 1: Identification
1.1. Product identifier
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
Product Identification Numbers
60-9800-4557-3, 60-9800-4558-1, 60-9800-4562-3, 62-5239-0330-0, 62-5239-5236-4
1.2. Recommended use and restrictions on use
Recommended use
Adhesive Sealant, Sealant
1.3. Supplier’s details
MANUFACTURER:
3M
DIVISION:
Industrial Adhesives and Tapes Division
ADDRESS:
3M Center, St. Paul, MN 55144-1000, USA
Telephone:
1-888-3M HELPS (1-888-364-3577)
1.4. Emergency telephone number
1-800-364-3577 or (651) 737-6501 (24 hours)
SECTION 2: Hazard identification
2.1. Hazard classification
Respiratory Sensitizer: Category 1.
Skin Sensitizer: Category 1.
Specific Target Organ Toxicity (repeated exposure): Category 1.
2.2. Label elements
Signal word
Danger
Symbols
Health Hazard |
Pictograms
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 2 of
12
Hazard Statements
May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction.
Causes damage to organs through prolonged or repeated exposure:
respiratory system |
Precautionary Statements
General:
Keep out of reach of children.
Prevention:
Do not breathe dust/fume/gas/mist/vapors/spray.
In case of inadequate ventilation wear respiratory protection.
Wear protective gloves.
Do not eat, drink or smoke when using this product.
Wash thoroughly after handling.
Contaminated work clothing must not be allowed out of the workplace.
Response:
IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing.
If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
IF ON SKIN: Wash with plenty of soap and water.
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Get medical advice/attention if you feel unwell.
Disposal:
Dispose of contents/container in accordance with applicable local/regional/national/international regulations.
2.3. Hazards not otherwise classified
None.
1% of the mixture consists of ingredients of unknown acute oral toxicity.
1% of the mixture consists of ingredients of unknown acute dermal toxicity.
3% of the mixture consists of ingredients of unknown acute inhalation toxicity.
SECTION 3: Composition/information on ingredients
Ingredient
C.A.S. No.
% by Wt
Urethane Polymer
51447-37-1
40 - 70 Trade Secret *
Titanium Dioxide
13463-67-7
10 - 30 Trade Secret *
Fumed Silica
112945-52-5
1 - 5 Trade Secret *
p,p'-Methylenebis(Phenyl Isocyanate)
101-68-8
< 2.4 Trade Secret *
Zinc Oxide
1314-13-2
< 2.3 Trade Secret *
Alkyl Isocyanate Silane
85702-90-5
< 2 Trade Secret *
Carbitol Acetate
112-15-2
< 2.0 Trade Secret *
Fumed Silica
7631-86-9
0.5 - 1.5 Trade Secret *
Heptane
142-82-5
< 0.3 Trade Secret *
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 3 of
12
*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade
secret.
SECTION 4: First aid measures
4.1. Description of first aid measures
Inhalation:
Remove person to fresh air. If you feel unwell, get medical attention.
Skin Contact:
Immediately wash with soap and water. Remove contaminated clothing and wash before reuse. If signs/symptoms develop,
get medical attention.
Eye Contact:
Flush with large amounts of water. Remove contact lenses if easy to do. Continue rinsing. If signs/symptoms persist, get
medical attention.
If Swallowed:
Rinse mouth. If you feel unwell, get medical attention.
4.2. Most important symptoms and effects, both acute and delayed
See Section 11.1. Information on toxicological effects.
4.3. Indication of any immediate medical attention and special treatment required
Not applicable
SECTION 5: Fire-fighting measures
5.1. Suitable extinguishing media
In case of fire: Use a fire fighting agent suitable for ordinary combustible material such as water or foam to extinguish.
5.2. Special hazards arising from the substance or mixture
None inherent in this product.
Hazardous Decomposition or By-Products
Substance
Condition
Isocyanates
During Combustion
Carbon monoxide
During Combustion
Carbon dioxide
During Combustion
Hydrogen Cyanide
During Combustion
Oxides of Nitrogen
During Combustion
Toxic Vapor, Gas, Particulate
During Combustion
5.3. Special protective actions for fire-fighters
No special protective actions for fire-fighters are anticipated.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Evacuate area. Ventilate the area with fresh air. Refer to other sections of this SDS for information regarding physical and
health hazards, respiratory protection, ventilation, and personal protective equipment.
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 4 of
12
6.2. Environmental precautions
Avoid release to the environment. For larger spills, cover drains and build dikes to prevent entry into sewer systems or
bodies of water.
6.3. Methods and material for containment and cleaning up
Pour isocyanate decontaminant solution (90% water, 8% concentrated ammonia, 2% detergent) on spill and allow to react for
10 minutes. Or pour water on spill and allow to react for more than 30 minutes. Cover with absorbent material. Working
from around the edges of the spill inward, cover with bentonite, vermiculite, or commercially available inorganic absorbent
material. Mix in sufficient absorbent until it appears dry. Remember, adding an absorbent material does not remove a
physical, health, or environmental hazard. Collect as much of the spilled material as possible. Place in a container approved
for transportation by appropriate authorities, but do not seal the container for 48 hours to avoid pressure build-up. Clean up
residue with an appropriate solvent selected by a qualified and authorized person. Ventilate the area with fresh air. Read and
follow safety precautions on the solvent label and SDS. Dispose of collected material as soon as possible.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Keep out of reach of children. Do not breathe dust/fume/gas/mist/vapors/spray. Do not get in eyes, on skin, or on clothing.
Do not eat, drink or smoke when using this product. Wash thoroughly after handling. Contaminated work clothing should
not be allowed out of the workplace. Avoid release to the environment. Wash contaminated clothing before reuse.
7.2. Conditions for safe storage including any incompatibilities
Keep container tightly closed to prevent contamination with water or air. If contamination is suspected, do not reseal
container. Store away from amines.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational exposure limits
If a component is disclosed in section 3 but does not appear in the table below, an occupational exposure limit is not available
for the component.
Ingredient
C.A.S. No.
Agency
Limit type
Additional Comments
p,p'-Methylenebis(Phenyl
Isocyanate)
101-68-8
ACGIH
TWA:0.005 ppm
FREE ISOCYANATES
101-68-8
Manufacturer
determined
TWA:0.005 ppm;STEL:0.02
ppm
p,p'-Methylenebis(Phenyl
Isocyanate)
101-68-8
OSHA
CEIL:0.2 mg/m3(0.02 ppm)
SILICA, AMORPHOUS
112945-52-
5
OSHA
TWA concentration:0.8
mg/m3;TWA:20 millions of
particles/cu. ft.
Zinc Oxide
1314-13-2
OSHA
TWA(as fume):5
mg/m3;TWA(as total dust):15
mg/m3;TWA(respirable
fraction):5 mg/m3
Zinc Oxide
1314-13-2
ACGIH
TWA(respirable fraction):2
mg/m3;STEL(respirable
fraction):10 mg/m3
Titanium Dioxide
13463-67-7 OSHA
TWA(as total dust):15 mg/m3
Titanium Dioxide
13463-67-7 ACGIH
TWA:10 mg/m3
A4: Not class. as human
carcin
Titanium Dioxide
13463-67-7 CMRG
TWA(as respirable dust):5
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 5 of
12
mg/m3
Heptane
142-82-5
ACGIH
TWA:400 ppm;STEL:500 ppm
Heptane
142-82-5
OSHA
TWA:2000 mg/m3(500 ppm)
SILICA, AMORPHOUS
7631-86-9
OSHA
TWA concentration:0.8
mg/m3;TWA:20 millions of
particles/cu. ft.
Fumed Silica
7631-86-9
CMRG
TWA(as respirable dust):3
mg/m3
ACGIH : American Conference of Governmental Industrial Hygienists
AIHA : American Industrial Hygiene Association
CMRG : Chemical Manufacturer's Recommended Guidelines
OSHA : United States Department of Labor - Occupational Safety and Health Administration
TWA: Time-Weighted-Average
STEL: Short Term Exposure Limit
CEIL: Ceiling
8.2. Exposure controls
8.2.1. Engineering controls
Use general dilution ventilation and/or local exhaust ventilation to control airborne exposures to below relevant Exposure
Limits and/or control dust/fume/gas/mist/vapors/spray. If ventilation is not adequate, use respiratory protection equipment.
8.2.2. Personal protective equipment (PPE)
Eye/face protection
Select and use eye/face protection to prevent contact based on the results of an exposure assessment. The following eye/face
protection(s) are recommended:
Skin/hand protection
Select and use gloves and/or protective clothing approved to relevant local standards to prevent skin contact based on the
results of an exposure assessment. Selection should be based on use factors such as exposure levels, concentration of the
substance or mixture, frequency and duration, physical challenges such as temperature extremes, and other use conditions.
Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible gloves/protective
clothing.
Gloves made from the following material(s) are recommended: Polymer laminate
If this product is used in a manner that presents a higher potential for exposure (eg. spraying, high splash potential etc.), then
use of protective coveralls may be necessary. Select and use body protection to prevent contact based on the results of an
exposure assessment. The following protective clothing material(s) are recommended: Apron - polymer laminate
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapors and particulates
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
General Physical Form:
Liquid
Specific Physical Form:
Paste
Odor, Color, Grade:
White thixotropic paste, slight odor
Odor threshold
No Data Available
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 6 of
12
pH
Not Applicable
Melting point
Not Applicable
Boiling Point
Not Applicable
Flash Point
No flash point
Evaporation rate
No Data Available
Flammability (solid, gas)
Not Applicable
Flammable Limits(LEL)
Not Applicable
Flammable Limits(UEL)
Not Applicable
Vapor Pressure
No Data Available
Vapor Density
No Data Available
Density
1.3 g/ml
Specific Gravity
1.3 [Ref Std: WATER=1]
Solubility in Water
Nil
Solubility- non-water
No Data Available
Partition coefficient: n-octanol/ water
No Data Available
Autoignition temperature
No Data Available
Decomposition temperature
No Data Available
Viscosity
100,000 - 500,000 centipoise
Hazardous Air Pollutants
2.6 % weight [Test Method: Calculated]
Volatile Organic Compounds
38 g/l [Test Method: tested per EPA method 24] [Details: EU
VOC content]
Percent volatile
2.83 % weight
VOC Less H2O & Exempt Solvents
38 g/l [Test Method: tested per EPA method 24]
SECTION 10: Stability and reactivity
10.1. Reactivity
This material may be reactive with certain agents under certain conditions - see the remaining headings in this section.
10.2. Chemical stability
Stable.
10.3. Possibility of hazardous reactions
Hazardous polymerization will not occur.
10.4. Conditions to avoid
None known.
10.5. Incompatible materials
Amines
Alcohols
Water
10.6. Hazardous decomposition products
Substance
Condition
None known.
Refer to section 5.2 for hazardous decomposition products during combustion.
SECTION 11: Toxicological information
The information below may not be consistent with the material classification in Section 2 if specific ingredient
classifications are mandated by a competent authority. In addition, toxicological data on ingredients may not be
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 7 of
12
reflected in the material classification and/or the signs and symptoms of exposure, because an ingredient may be
present below the threshold for labeling, an ingredient may not be available for exposure, or the data may not be
relevant to the material as a whole.
11.1. Information on Toxicological effects
Signs and Symptoms of Exposure
Based on test data and/or information on the components, this material may produce the following health effects:
Inhalation:
Respiratory Tract Irritation: Signs/symptoms may include cough, sneezing, nasal discharge, headache, hoarseness, and nose
and throat pain.
Allergic Respiratory Reaction: Signs/symptoms may include difficulty breathing, wheezing, cough, and tightness of chest.
May cause target organ effects after inhalation.
Skin Contact:
Mild Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness. Allergic Skin Reaction
(non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Eye Contact:
Contact with the eyes during product use is not expected to result in significant irritation.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.
Target Organ Effects:
Prolonged or repeated exposure may cause:
Respiratory Effects: Signs/symptoms may include cough, shortness of breath, chest tightness, wheezing, increased heart rate,
bluish colored skin (cyanosis), sputum production, changes in lung function tests, and/or respiratory failure.
Carcinogenicity:
Ingredient
C.A.S. No.
Class Description
Regulation
Titanium Dioxide
13463-67-7
Grp. 2B: Possible human carc.
International Agency for Research on Cancer
Additional Information:
Persons previously sensitized to isocyanates may develop a cross-sensitization reaction to other isocyanates.
Toxicological Data
If a component is disclosed in section 3 but does not appear in a table below, either no data are available for that endpoint or
the data are not sufficient for classification.
Acute Toxicity
Name
Route
Species
Value
Overall product
Dermal
No data available; calculated ATE > 5,000 mg/kg
Overall product
Inhalation-
Vapor(4 hr)
No data available; calculated ATE > 50 mg/l
Overall product
Ingestion
No data available; calculated ATE > 5,000 mg/kg
Urethane Polymer
Ingestion
Rat
LD50 > 5,000 mg/kg
Titanium Dioxide
Dermal
Rabbit
LD50 > 10,000 mg/kg
Titanium Dioxide
Inhalation-
Dust/Mist
(4 hours)
Rat
LC50 > 6.82 mg/l
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 8 of
12
Titanium Dioxide
Ingestion
Rat
LD50 > 10,000 mg/kg
Fumed Silica
Dermal
Rabbit
LD50 > 5,000 mg/kg
Fumed Silica
Inhalation-
Dust/Mist
(4 hours)
Rat
LC50 > 0.691 mg/l
Fumed Silica
Ingestion
Rat
LD50 > 5,110 mg/kg
p,p'-Methylenebis(Phenyl Isocyanate)
Inhalation-
Vapor
LC50 estimated to be 10 - 20 mg/l
p,p'-Methylenebis(Phenyl Isocyanate)
Dermal
Rabbit
LD50 > 5,000 mg/kg
p,p'-Methylenebis(Phenyl Isocyanate)
Inhalation-
Dust/Mist
(4 hours)
Rat
LC50 0.369 mg/l
p,p'-Methylenebis(Phenyl Isocyanate)
Ingestion
Rat
LD50 31,600 mg/kg
Zinc Oxide
Dermal
LD50 estimated to be > 5,000 mg/kg
Zinc Oxide
Inhalation-
Dust/Mist
(4 hours)
Rat
LC50 > 5.7 mg/l
Zinc Oxide
Ingestion
Rat
LD50 > 5,000 mg/kg
Carbitol Acetate
Dermal
Rabbit
LD50 15,000 mg/kg
Carbitol Acetate
Ingestion
Rat
LD50 11,000 mg/kg
Fumed Silica
Dermal
Rabbit
LD50 > 5,000 mg/kg
Fumed Silica
Inhalation-
Dust/Mist
(4 hours)
Rat
LC50 > 0.691 mg/l
Fumed Silica
Ingestion
Rat
LD50 > 5,110 mg/kg
Heptane
Dermal
Rabbit
LD50 3,000 mg/kg
Heptane
Inhalation-
Vapor (4
hours)
Rat
LC50 103 mg/l
Heptane
Ingestion
Rat
LD50 > 15,000 mg/kg
ATE = acute toxicity estimate
Skin Corrosion/Irritation
Name
Species
Value
Titanium Dioxide
Rabbit
No significant irritation
Fumed Silica
Rabbit
No significant irritation
p,p'-Methylenebis(Phenyl Isocyanate)
official
classifica
tion
Irritant
Zinc Oxide
Human
and
animal
No significant irritation
Carbitol Acetate
Human
and
animal
Minimal irritation
Fumed Silica
Rabbit
No significant irritation
Heptane
Human
Mild irritant
Serious Eye Damage/Irritation
Name
Species
Value
Titanium Dioxide
Rabbit
No significant irritation
Fumed Silica
Rabbit
No significant irritation
p,p'-Methylenebis(Phenyl Isocyanate)
official
classifica
tion
Severe irritant
Zinc Oxide
Rabbit
Mild irritant
Carbitol Acetate
Rabbit
Mild irritant
Fumed Silica
Rabbit
No significant irritation
Heptane
Moderate irritant
Skin Sensitization
Name
Species
Value
Titanium Dioxide
Human
and
animal
Not sensitizing
Fumed Silica
Human
Not sensitizing
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 9 of
12
and
animal
p,p'-Methylenebis(Phenyl Isocyanate)
official
classifica
tion
Sensitizing
Zinc Oxide
Guinea
pig
Some positive data exist, but the data are not
sufficient for classification
Carbitol Acetate
Human
and
animal
Not sensitizing
Fumed Silica
Human
and
animal
Not sensitizing
Respiratory Sensitization
Name
Species
Value
p,p'-Methylenebis(Phenyl Isocyanate)
Human
Sensitizing
Germ Cell Mutagenicity
Name
Route
Value
Titanium Dioxide
In Vitro
Not mutagenic
Titanium Dioxide
In vivo
Not mutagenic
Fumed Silica
In Vitro
Not mutagenic
p,p'-Methylenebis(Phenyl Isocyanate)
In Vitro
Some positive data exist, but the data are not
sufficient for classification
Zinc Oxide
In Vitro
Some positive data exist, but the data are not
sufficient for classification
Zinc Oxide
In vivo
Some positive data exist, but the data are not
sufficient for classification
Carbitol Acetate
In Vitro
Not mutagenic
Fumed Silica
In Vitro
Not mutagenic
Heptane
In Vitro
Not mutagenic
Carcinogenicity
Name
Route
Species
Value
Titanium Dioxide
Ingestion
Multiple
animal
species
Not carcinogenic
Titanium Dioxide
Inhalation
Rat
Carcinogenic
Fumed Silica
Not
Specified
Mouse
Some positive data exist, but the data are not
sufficient for classification
p,p'-Methylenebis(Phenyl Isocyanate)
Inhalation
Rat
Some positive data exist, but the data are not
sufficient for classification
Fumed Silica
Not
Specified
Mouse
Some positive data exist, but the data are not
sufficient for classification
Reproductive Toxicity
Reproductive and/or Developmental Effects
Name
Route
Value
Species
Test Result
Exposure
Duration
Fumed Silica
Ingestion
Not toxic to female reproduction
Rat
NOAEL 509
mg/kg/day
1 generation
Fumed Silica
Ingestion
Not toxic to male reproduction
Rat
NOAEL 497
mg/kg/day
1 generation
Fumed Silica
Ingestion
Not toxic to development
Rat
NOAEL
1,350
mg/kg/day
during
organogenesi
s
p,p'-Methylenebis(Phenyl Isocyanate)
Inhalation
Some positive developmental data exist,
but the data are not sufficient for
classification
Rat
NOAEL
0.004 mg/l
during
organogenesi
s
Zinc Oxide
Ingestion
Some positive
reproductive/developmental data exist,
but the data are not sufficient for
classification
Multiple
animal
species
NOAEL 125
mg/kg/day
premating &
during
gestation
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 10 of
12
Fumed Silica
Ingestion
Not toxic to female reproduction
Rat
NOAEL 509
mg/kg/day
1 generation
Fumed Silica
Ingestion
Not toxic to male reproduction
Rat
NOAEL 497
mg/kg/day
1 generation
Fumed Silica
Ingestion
Not toxic to development
Rat
NOAEL
1,350
mg/kg/day
during
organogenesi
s
Target Organ(s)
Specific Target Organ Toxicity - single exposure
Name
Route
Target Organ(s)
Value
Species
Test Result
Exposure
Duration
p,p'-Methylenebis(Phenyl
Isocyanate)
Inhalation
respiratory irritation
May cause respiratory irritation
official
classifica
tion
NOAEL Not
available
Carbitol Acetate
Inhalation
central nervous
system depression
May cause drowsiness or
dizziness
Human
and
animal
NOAEL Not
available
not applicable
Carbitol Acetate
Ingestion
central nervous
system depression
May cause drowsiness or
dizziness
Multiple
animal
species
NOAEL Not
available
not applicable
Heptane
Inhalation
central nervous
system depression
May cause drowsiness or
dizziness
Human
NOAEL Not
available
Heptane
Inhalation
respiratory irritation
Some positive data exist, but the
data are not sufficient for
classification
Human
NOAEL Not
available
Heptane
Ingestion
central nervous
system depression
May cause drowsiness or
dizziness
Human
NOAEL Not
available
Specific Target Organ Toxicity - repeated exposure
Name
Route
Target Organ(s)
Value
Species
Test Result
Exposure
Duration
Titanium Dioxide
Inhalation
respiratory system
Some positive data exist, but the
data are not sufficient for
classification
Rat
LOAEL
0.010 mg/l
2 years
Titanium Dioxide
Inhalation
pulmonary fibrosis
All data are negative
Human
NOAEL Not
available
occupational
exposure
Fumed Silica
Inhalation
respiratory system |
silicosis
All data are negative
Human
NOAEL Not
available
occupational
exposure
p,p'-Methylenebis(Phenyl
Isocyanate)
Inhalation
respiratory system
Causes damage to organs
through prolonged or repeated
exposure
Rat
LOAEL
0.004 mg/l
13 weeks
Zinc Oxide
Ingestion
nervous system
Some positive data exist, but the
data are not sufficient for
classification
Rat
NOAEL 600
mg/kg/day
10 days
Zinc Oxide
Ingestion
endocrine system |
hematopoietic
system | kidney
and/or bladder
Some positive data exist, but the
data are not sufficient for
classification
Other
NOAEL 500
mg/kg/day
6 months
Carbitol Acetate
Inhalation
respiratory system
Some positive data exist, but the
data are not sufficient for
classification
Rat
NOAEL 0.48
mg/l
2 weeks
Carbitol Acetate
Inhalation
liver | immune
system | kidney
and/or bladder
All data are negative
Rat
NOAEL 0.48
mg/l
2 weeks
Fumed Silica
Inhalation
respiratory system |
silicosis
All data are negative
Human
NOAEL Not
available
occupational
exposure
Heptane
Inhalation
liver | nervous
system | kidney
and/or bladder
All data are negative
Rat
NOAEL 12
mg/l
26 weeks
Aspiration Hazard
Name
Value
Heptane
Aspiration hazard
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 11 of
12
Please contact the address or phone number listed on the first page of the SDS for additional toxicological information
on this material and/or its components.
SECTION 12: Ecological information
Ecotoxicological information
Please contact the address or phone number listed on the first page of the SDS for additional ecotoxicological information on this material
and/or its components.
Chemical fate information
Please contact the address or phone number listed on the first page of the SDS for additional chemical fate information on this material
and/or its components.
SECTION 13: Disposal considerations
13.1. Disposal methods
Dispose of contents/ container in accordance with the local/regional/national/international regulations.
Dispose of waste product in a permitted industrial waste facility. Empty drums/barrels/containers used for transporting and
handling hazardous chemicals (chemical substances/mixtures/preparations classified as Hazardous as per applicable
regulations) shall be considered, stored, treated & disposed of as hazardous wastes unless otherwise defined by applicable
waste regulations. Consult with the respective regulating authorities to determine the available treatment and disposal
facilities.
EPA Hazardous Waste Number (RCRA): Not regulated
SECTION 14: Transport Information
For Transport Information, please visit http://3M.com/Transportinfo or call 1-800-364-3577 or 651-737-6501.
SECTION 15: Regulatory information
15.1. US Federal Regulations
Contact 3M for more information.
311/312 Hazard Categories:
Fire Hazard - No
Pressure Hazard - No
Reactivity Hazard - No
Immediate Hazard - Yes
Delayed Hazard - Yes
Section 313 Toxic Chemicals subject to the reporting requirements of that section and 40 CFR part 372 (EPCRA):
Ingredient
C.A.S. No
% by Wt
p,p'-Methylenebis(Phenyl Isocyanate)
101-68-8
< 2.4
p,p'-Methylenebis(Phenyl Isocyanate) (Benzene,
1,1'-methylenebis[4-isocyanato-)
101-68-8
< 2.4
p,p'-Methylenebis(Phenyl Isocyanate)
(DIISOCYANATES (CERTAIN CHEMICALS
ONLY))
101-68-8
< 2.4
Zinc Oxide (ZINC COMPOUNDS)
1314-13-2
< 2.3
Carbitol Acetate (GLYCOL ETHERS)
112-15-2
< 2.0
background image
3M(TM) Marine Adhesive Sealant Fast Cure 5200, White; PN 06520 , 05220, 06534, 06535
10/29/14
__________________________________________________________________________________________
Page 12 of
12
15.2. State Regulations
Contact 3M for more information.
15.3. Chemical Inventories
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.
15.4. International Regulations
Contact 3M for more information.
This SDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
SECTION 16: Other information
NFPA Hazard Classification
Health: 2 Flammability: 1 Instability: 1 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address
the hazards that are presented by short-term, acute exposure to a material under conditions of fire, spill, or similar
emergencies. Hazard ratings are primarily based on the inherent physical and toxic properties of the material but also include
the toxic properties of combustion or decomposition products that are known to be generated in significant quantities.
Document Group:
16-5850-9
Version Number:
12.00
Issue Date:
10/29/14
Supercedes Date:
08/22/12
DISCLAIMER: The information in this Safety Data Sheet (SDS) is believed to be correct as of the date issued. 3M MAKES
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR
USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable
for user's method of use or application. Given the variety of factors that can affect the use and application of a 3M product,
some of which are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to
determine whether it is fit for a particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer
may have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness
or accuracy. In addition, information obtained from a database may not be as current as the information in the SDS available
directly from 3M
3M USA SDSs are available at www.3M.com